The Pulsar 3400 is the latest generation of ultrasound systems designed to manage algae blooms in ponds and lagoons up to about 3 acres in size. It's perfect for small to mid-sized ponds on golf courses, commercial properties, waste water lagoons, and recreational water bodies.

It's coverage area provides 360 degree protection of most filamentous and single cell algae species using over 4400 targeted frequencies.

This density of very specific frequencies makes it a safe, non-chemical way, to manage most algae problems.

Ultrasonic Algae Control Is Cost Effective

The unfortunate truth in managing large ponds and lakes is that the larger the water body, the more expensive it can be to treat. In many cases, algaecides are recommended to treat an algae problem and while they can work in the short term, the fact is, the cost of routine use of an "additive" can well, add up quickly.

It has not been uncommon for us to hear about 30 to 50 acre lakes being treated with copper algaecides to the tune of $50,000 per year! Keep in mind, dosage rates and the frequency of use will factor in here, but in cases where an algaecide is being routinely used, it may make more sense to consider ultrasound. Where a one time cost of the equipment could pay for itself in just a few months time.

This is why we also consider ultrasonic algae control as a possible option in an pond or lake of appreciable size, and particularly one that's requiring regular treatments with algaecides.

Ultrasonic Algae Control Is Safe

The Pulsar 3400 is safe for fish. Keep in mind, ultrasound technology is not a new thing. We've been working with it for almost 15 years now, and early on we tested the algae treatment approach to make sure it was safe for fish. In fact in those early years, we would use them in Koi ponds of various sizes and currently they are used in various aquaculture operations to help manage algae safely, without harm to fish or other aquatic critters.

The Pulsar 3400 Is Easy To Maintain

Ultrasound systems have had one minor but annoying problem. Since the transducers heat up a bit while in operation, this heat attracts mineral deposits that are in the water. These deposits can eventually coat the transducer face and limit the output of the device. Wiper systems have been used with limited success to try to combat the issue but the Pulsar takes managing this problem a good bit further.

Each Pulsar uses an anti-fouling, anti-adhesion covering called Sharklet™, which inhibits mineral deposits from sticking to the transducer. As well, the Pulsar has a dozen cooling disks on the transducer to help dissipate heat off the head. These two advances will greatly reduce the hassle and need to clean the device on a routine basis.

Land And Solar Powered Options Are Available

Pulsar Ultrasound Systems are extremely energy efficient. A yearly cost to operate in most locations would typically be less than $50 per year. Standard systems use a land based power supply and a water proof power cable with lengths ranging from 5 meters up to 120 meters. Since the transducers emit sound waves in a full 360 degree pattern, center placement in a pond or lake is best for coverage, although not always required in smaller ponds.

For larger lakes, the device can be powered with a solar float platform. Optional telemetry packages are also available with the solar float and included monitoring for system operations as well as water quality parameters.

The Pulsar comes with a 3 year warranty.

*Specific ranges (radially) for the Pulsar 3400 are 45 meters for biofilm, 115 meters for filamentous algae, and 300 meters for blue-green algae.

If you have questions on the Pulsar Ultrasound System, or would like to investigate if ultrasound could help with algae issues in your pond or lake, please contact us here.

Pulsar 3400 Ultrasonic Algae Control System

You may also like